The Tesla Model 3 is a great car. It has a lot of features that other cars don’t have, one of the features that makes it special is the “Neutral” gear. This article will teach you how to put Tesla Model 3 in Neutral.
Tesla’s unique design for the Model 3 includes an electric motor on each axle rather than one at the back or front and it has no gearbox or clutch pedal, instead using regenerative braking to slow down the vehicle when necessary.
How to Put Tesla Model 3 in Neutral with Dead Battery
NOTE: you must press the brake pedal so as to shift out of neutral when you are driving slower than 8 km/h approximately. The Model 3 automatically shifts into the park when you leave the driver’s seat as well.
To put tesla model 3 in neutral with a dead battery, give the gearshift a half push so that it falls halfway between the drive and reverse options. You may want your tesla to remain neutral for an extended period.
So to put your tesla model 3 in neutral with a dead battery for an extended period, you will need to put it in tow mode. To put it in tow mode, shift into the parking gear and also hold the brake as simple as that.
Also, note that it is possible to drive a tesla until the battery is completely dead and the car stops at the side of the road. But if such happens, you may actually need to call for a flatbed truck so as to pick up and take it from there.
Another point to note about this model 3 is that, when is in the park, you must press the brake pedal to shift. Then you move the drive stalk up or down into different drive modes and use the touchscreen to engage transport mode and stay neutral.
Watch Video Guide
How to Put Tesla in Neutral for Car Wash
Actually, you may not need to put your tesla into neutral often but on a certain occasion, it may require your car to roll freely. Your car will roll freely in neutral mode exactly like an automatic car wash.
Also, shifting the tesla into a neutral mode is so similar to shifting it into the drive as well as into reverse mode. But tesla requires just one step so as not to shift it into neutral accidentally as it may cause the car to roll backward if care is not taken.
Now you can put your tesla in neutral for car wash while driving, by briefly pushing the drive stalk up to the first position on active autosteer or traffic-aware cruise control. You then hold it there for more than one second on time.
Here, after you have successfully completed the above process, the autosteer or traffic-aware cruise control is disabled. But when the car is in reverse, shift it to neutral by briefly pushing the drive stalk down to the first position simply and that’s all.
If you attempt to leave the car while the car is still in neutral mode, it is actually similar to leaving it while not in the parking position. So in that case, the car will automatically shift out of neutral and into the park.
On The Blog
Why Does Tesla Have No Neutral?
The reason why Tesla has no neutral is that Tesla is an electric car and an electric car has no gears. Actually, electric cars do not have neutral gear because they lack a transmission and do not have gears.
The function of a transmission is to regulate the power to the wheels, but since the batteries regulate the power in electric cars. With that, they do not need a transmission to function very well.
Take note that electric cars almost and always feature a single gear which is at once without the transmission in the typical knowledge so with that there is no neutral. You should make sure to separate the wheels from the engine in that case.
Neutral is actually necessary in order to push your car out of a rut or to tow it to an auto garage as the case may be. But the reason is for the result is still going to be the same but the cause is surely going to be different.
Additionally, electric cars still have neutral in the order they be towed but the technology behind them is different from gas-powered vehicles. Neutral is an essential function that allows cars to be towed without damage and that’s why electric cars need neutral.
Conclusively, neutral allows the model 3 to roll freely when you are not pressing the brake pedal. When parked, you can shift into neutral by briefly pushing the drive stalk either up or down to the first position.
To put tesla model 3 in neutral when driving, shift into neutral by briefly pushing the drive stalk up to the first position on active autosteer or traffic-aware cruise control. You then hold it there for more than one second on time.
In continuation of the process, the autosteer or traffic-aware cruise control is disabled. Also when the car is in reverse, shift it to neutral by briefly pushing the drive stalk down to the first position simply.
After successfully knowing how to Put Tesla Model 3 in Neutral and all other information in relation to the topic, you can go ahead and make use of the information. So now enjoy using your vehicle with the help of this article.