Why is 2011 Ford F150 Radio Not Working

Firstly, your 2011 ford radio not working and showing trouble is often a signal of other underlying issues that need to be fixed in time. So causing the radio to be misbehaving is actually more than a few things that could be the case.

The 2011 Ford F150 radio not working has been one of the most reported issues recently. Ford did not release an official statement on the issue, but there are a few ways to fix the issue.

If you have a voltmeter, you can test and see if your battery is low, if that is the case, you will need to replace it with a new one. If that doesn’t work, it may be possible to replace the fuse in your car’s fuse box with one of higher amperage so that it can handle more power.

 

Why is 2011 Ford F150 Radio Not Working

 

There are a few reasons why the 2011 Ford F-150 radio is not working, but the main reason is when there are blown fuses on the fuse box. So radio not turning or working issues can be due to one or few fuses in the fuse box being blown up.

The second reason why you are encountering a problem with the 2011 ford F150 not working is solder flow and other minor errors in the radio. So you make sure you take out the main board to brake it for some minutes.

 

 

Another possible reason that makes the radio on your model 2011 ford f150 radio stop working is the stuck radio problem. If this is the case, you should reset the unit or detach the negative battery terminator for about an hour and then connect it again.

Apart from the above reasons, the last reason that can make your radio not to be working is the issue of the bad factory radio. Bad factory radio can be troubleshot and replaced the radio unit as possible.

 

How to Reset 2011 Ford F150 Radio Not Working

 

NOTE: When encountering such a problem, you can easily test out your truck fuses to know about the state of the radio power by using the voltmeter. You should also check for blown fuses in the ford f150 radio.

To reset or fix the 2011 ford f150 radio that is not working, first, take out the radio and check all the connections. Also check at the solder joints, after done checking for minor faults then you try and fix them so as to start working again.

You can fix the problem of blown fuse by testing out the fuses inside the fuse box and replacing the damaged ones. So note that the ford f150 radio won’t turn on if you don’t reset or fix blown fuses properly.

 

 

You can fix a bad factory radio problem by troubleshooting and then replacing the radio unit as well. You actually need to fix the problematic ford f150 factory radio in order to avoid rapid blowing of the fuses.

In case you discovered that the problem of your ford f150 radio not working is a stuck radio problem. You can simply reset the unit or you detach the negative battery terminator for about an hour and connect it back as simple as that.

For solder flow and other minor errors causing the radio not to be working, simply reset it by taking out the main board to break for some minutes. Note that your truck radio system can be damaged due to one or more shorted wires so be careful.

 

On The Blog

How to Reset Toyota Corolla Radio

How to Turn off KeySense in Chrysler Pacifica

How to Calibrate Toyota Corolla 2014 Touch Screen

How to Reset FCW on Honda Accord

How to Remove Glove Box Chevy Malibu

 

Where is the Radio Fuse for a 2011 Ford F150?

 

Actually, most of the radio fuses for ford F150 is located in two common locations which are at the fuse box under the hood and inside the car. So radio fuse for a 2011 ford F150  is located in the fuse box under the hood.

For the easy location of the radio fuse, you can smartly check your ford user manual so as to find out the fuse box easily. In case you can’t find it, just locate a hump-shaped box inside your truck hood and you will find it there.

 

 

In a simple way, you can find all fuses in the body control module that is around the passenger side floorboards. So there is numerous way in which you can locate your radio fuse inside the ford f150.

Note that the radio fuse is usually sealed with a cover and it needs to be removed before getting access to the fuse. In case of a blown fuse, always turn off the vehicle before taking out the blown fuse to avoid further damage.

 

How Do I Know if My F150 Fuse is Blown?

 

If you discover or see that there is a darker fuse or the fuse is burn type in nature inside the box, it indicates a broken one or a blown fuse. So take note that a blown or broken fuse can be darker or burn type.

Another way in which you can know if the fuse is blown is that the upper part of the fuse is torn into two pieces. So take that you can indicate blown fuse when its upper part is torn into two pieces but to avoid issue simple change the broken fuse.

You can check if your f150 ford fuse is blown by removing the fuse from its holder with the use of a screwdriver if the needs arise. Make use of the screwdriver to unscrew the fuse holder cap and then look at the fuse wire.

If there is a visible gap in the wire or there is a dark or metallic smear inside the glass, then the fuse is blown which needs to be replaced. With these methods, you can check and be sure if any of the fuses are blown.

Caution: Making use of higher ampere bulbs in the taillights or headlights can make the fuses of the radio be blown. And if a metal or steel item drops inside the fuse will influence the fuses to blow.

 

Should I Disconnect Car Battery when Changing Radio?

 

Yes, you should disconnect the car battery when changing the radio so as to be on the safer side or avoid any issue. It is actually a recommended procedure for you to disconnect your car battery before making any electrical changes.

The reason for the need of disconnecting the car battery before changing the radio is because of accidental short that could take place during the process. So it is a good safety measure to disconnect the car battery when changing the radio.

Actually, to remove your car stereo, you will first need to disconnect your battery’s ground wire. That’s the black wire connected to the battery under the hood of your car as it is dangerous to work on electrical components of a vehicle with the connection.

Because some of the electrical currents are preserved in the computer for a while afterward so most sources recommended leaving the battery disconnected. For the time of 15 minutes make sure the computer forgets the code before reconnection.

NOTE: Before beginning the process of disconnecting your battery, you should start by turning your car off. You should never make an attempt of disconnecting your car’s battery while your car is still powered on.

 

Conclusion

 

Conclusively, there are a few reasons why the 2011 Ford F-150 radio is not working, but the main reason is when there are blown fuses on the fuse box. So radio not turning or working issues can be due to one or few fuses in the fuse box being blown up.

The second reason why you are encountering a problem with the 2011 ford F150 not working is solder flow and other minor errors in the radio. Another reason that makes the radio on your model 2011 ford f150 radio stop working is the stuck radio problem.

With the information, you can rest assured about the reason why is 2011 ford F150 radio not working. And now you have gotten how to fix or reset the problem causing the radio not to be working.