Hi guys! Do you want to know how to reset the oil change light on ford focus successfully when the need arises?. If yes, then you are at the right place to get all it takes to do the process successfully on your ford focus vehicle.
I will be providing you with a lot of information about how to come about resetting the oil light or indicator on your ford focus. But make sure you keep on reading in order to get the full information that you will be needing.
How to Reset Oil Change Light on Ford Focus
- 1 How to Reset Oil Change Light on Ford Focus
- 1.1 How to Reset Oil Change Light Ford F150
- 1.2 Ford Focus Engine Oil Change Due Message Meaning
- 1.3 Why Does My Car Says Change Oil After I Changed It?
- 1.4 Why is Oil Light on After Oil Change?
- 1.5 Does Oil Life Automatically Reset?
- 1.6 Why Does My Oil Light Keep Coming on but My Oil Isn’t Low?
- 1.7 How Long Does It Take for Oil Light to Go off After Oil Change?
- 1.8 Conclusion
- 1.9 Related
To reset the oil change the light on Ford Focus, first, switch the ignition on but do not start the engine at the moment. You then fully press the accelerator and also the brake pedals at the same time.
Make sure the accelerator and the brake pedals are fully pressed and wait for about three seconds of time. After three seconds, a message displays confirming the reset procedure is in the process will pop up.
After the above process, you can now release the accelerator and the brake pedals at the same time and then switch the ignition off. It’s done now as you have successfully reset the oil change light on your ford focus successfully.
Note that you can only reset the oil life monitoring system after changing the oil and the oil filter of your ford vehicle. That is the most important thing that you need to take note of before going into the process.
How to Reset Oil Change Light Ford F150
Note that for you to reset the oil change light for F150, it should be after changing the oil change service. Then after changing the oil change service, you can now think of following the procedure below.
To reset the oil change light for F150, turn the ignition to run in one position before starting the engine. Use the up and down arrows to scroll the menu and select settings followed by the convenience icon.
After you have successfully completed the process above, you select oil life reset and click on ok so as to reset the process. By now the oil change ford F150 has been successfully reset.
On The Blog
Ford Focus Engine Oil Change Due Message Meaning
The meaning of Ford Focus engine oil change due message is an indicator that the oil life is low or near to zero percentage (0%). So the messaging system will show you an oil change due message.
Unless the oil or oil filter is changed in this case, this oil messaging system will not reset at the moment. And the oil light will continue to display as well and the light can come on if the oil pressure of the engine drops.
NOTE: The oil change light usually comes on in a ford focus when it is time for you to do the oil change on the vehicle. The general rule of the oil change is that cars should have a complete oil change within the region of 5,000 to 10,000 miles.
Why Does My Car Says Change Oil After I Changed It?
The reason why your car says to change oil after you might have changed it is that the oil pump may not be circulating enough oil to keep the engine’s parts lubricated. And may not be functioning properly.
So care must be taken in this kind of case because it can actually turn out or cause multiple engine issues. Although receiving oil changes at regular intervals can prevent this problem from occuring as part does wear over time.
Also when this light illuminates, it means that the oil pressure in your vehicle’s engine has dropped and action needs to be taken immediately. If you continue to drive with this light still on, it may cause serious damage to your vehicle’s engine.
Why is Oil Light on After Oil Change?
The reason why the oil light is on even after an oil change is that the oil pump may not be circulating enough oil to keep the engine’s parts lubricated. It may not function properly which can as well cause multiple engine issues.
As the oil change light usually comes on in a ford focus when it is time for you to do the oil change on the vehicle. So as the light does come up or light on even after filling the engine oil of the car so take note of that.
Does Oil Life Automatically Reset?
No, the oil life does not automatically reset so there is a need for you to reset the oil life whenever there is a need to do so. So for you to reset the oil life engine change, you will need to manually reset it by yourself.
You can see the oil life by simply inserting your key into the keyhole and turning it until the car’s dashboard light comes on and that resets the life oil. Or make use of the steering wheel control buttons to scroll to your car’s settings menu and reset it there.
Why Does My Oil Light Keep Coming on but My Oil Isn’t Low?
The reason why your light keeps coming on even though your oil is not low is that your oil pressure sensor or your oil pump needs to be replaced. So there is need to for you replace the oil as soon as possible.
Actually, if the light keeps coming on your dashboard, it does not always mean your oil is low, leaking, or dirty so there is the possibility of your oil still not low and it signal. It may signal for the replacement of the oil pump only.
How Long Does It Take for Oil Light to Go off After Oil Change?
On the vehicles with an oil change light, the oil change is actually needed when the light remains on after setup. So it is best to make the setup and schedule the oil change within one to two weeks.
It takes you about two weeks or about five hundred miles of driving before a flashing oil light turns off after changing the oil. So before it leads to a legitimate problem in the vehicle, you have two weeks of driving time.
Conclusively, to reset the oil change light on ford focus, first switch the ignition on but do not start the engine at the moment. You then fully press the accelerator and also the brake pedals at the same time.
Make sure the accelerator and the brake pedals are fully pressed and wait for about three seconds of time. After three seconds, a message displays confirming the reset procedure through a pop-up.