How To Turn Off Airbag Warning Light – Airbag Reset

how to turn off airbag warning light

How to turn off airbag warning light? or how to reset airbag light, the two sentences mean the same thing. If your airbag you car’s airbag system is faulty, the warning light would come on.

Airbag is a safety device, that is found in most vehicles including trucks. The function of the airbag is to create a cushion affect between the driver, passenger from hitting there chest or head in an accident situation.

This safety device is equipped with sensor and a module that regulates its actives. If and accident happens or during a collision, the airbag sensor sends signal to the module which in turn pushes out the airbag.

What does it mean when the airbag light stays on?

If either the sensor or the module is faulty the warning light will come up. The warning light is not danger by itself but what it translate into if its not repaired in time.

When the warning light is on, it means the system is faulty and is deactivated. This simply means that if and accident happens then the airbag might probably not do its work.

Any time you see the warning light on, endeavor to know the cause of the problem then fix it. The importance of the air bad is much as it serves as a life saver in accidents.

How to reset airbag light using an OBD-II scanner

When the airbag light comes up it is a sign that there is a malfunction in the system. This malfunction can localized to two major arts of the system namely the sensor or the airbag module.

Regardless of which one it maybe, the warning light will come up as to alert you that something is wrong. The first step for you is to identify what the problem is then fix it.

Normally fixing it will make the warning light go off automatically. Continue reading to learn how to reset airbag light with an OBD scan tool.

  • Park your car switch off the ignition
  • Turn the key back to “ON” position
  • Locate the OBD port under the steering wheel
  • Connect the OBD scanner to the port
  • Read the trouble code using the OBD scanner
  • Erase the code and the warning light will go off

For this to work you have to make sure that whatever the problems is has been fixed. If you do not fix the problem before resetting the warning light, the light will remain on.

Read Also

Can you reset airbag light without tool?

Can you reset airbag light without tool? the simple is answer to this is yes. Airbag light can be turned off without using any tool in two ways.

But for the two methods to work, the primary cause has to be identified and fixed. For example, a depleted backup battery, damaged sensor or a corroded module can cause the warning light to come on.

Generally, replacing the faulty parts of the system would automatically make the warning light to go off by itself. But in situations where the light come on by mistake or refuses to go off after fixing the problem, a manual reset would have to be done.

Like i said before, to reset the light, check the system for faulty parts and replace it. If these does not work, switch off the car and turn the key to “ON” position and wait for the airbag light to come on.

Still wait for the light to go off then switch off the vehicle. Repeat this process for about 3 to 4 times, then finally start your vehicle and the light should be gone by now.

Unfortunately, this method does not work on most modern cars because of how sophisticated they are and the importance of airbag. You can only reset the light when the problem is fixed.

Is it safe to drive with airbag light on?

It is required by law, that all driving vehicles should have a functioning airbag as a safety precaution. The primary function of the airbag is to protect the driver and the passenger from hitting their head or chest to hard surface if an accident occurs.

If the airbag light is on, it simply means the system is faulty and would not deeply when there is a collision. The bottom line is, it is not safe to drive with airbag light on for whatever reason.

Remember, if your airbags are not functional in a crash, it may cause death or serious injuries. Always make sure your airbag system are working properly at all times.

Can I remove the airbag from my car?

Removing the airbag completely is the best option though. Not just the front sensor but the whole assembly and replacing the steering wheel. Wait an hour plus after you disconnect the battery or have a skilled professional’s help is the best way to avoid dying if you start messing around with your airbags.

Be the first to comment

Leave a Reply