How to use Tesla key card, Tesla Key Card is a wireless key that you can use to start and open your Tesla. It can also be used to lock the car, even if your smartphone is miles away.
Tesla Key Card allows owners of Tesla vehicles to use their smartphones as their keys. This card acts as a key fob, but it’s much more secure than the traditional methods of using a physical key or pin code.
How to Use Tesla Key Card To Open and Lock Door
Contents
Tesla provides a key card that usually communicates with model 3 with the use of short-range radio frequency identification signals. The key card is used to authenticate phone keys to work with model 3.
In general, the use a key card to unlock or lock Tesla Model 3, you need to position the card and click it against the card reader located below the autopilot camera. You will find the autopilot camera is located on the driver’s side door pillar.
To use a Tesla key card to open and lock the doors of a Tesla vehicle, you will need to have the key card in close proximity to the vehicle. Here’s how to do it:
- To unlock the doors, hold the key card up to the Tesla logo on the door handle. The doors will unlock and the interior lights will turn on.
- To lock the doors, hold the key card up to the Tesla logo on the door handle again. The doors will lock and the interior lights will turn off.
If you have a Tesla key fob, you can also use it to unlock and lock the doors of your Tesla vehicle. Simply press the unlock or lock button on the key fob to control the doors.
It’s important to note that the key card and key fob will only work if they are within range of the vehicle. If you are having trouble using the key card or key fob to unlock or lock the doors, make sure they are close enough to the vehicle and try again.
How to Start Tesla Model 3 with Key Card
The key card is used to authenticate phone keys to work with the Tesla model 3 vehicle successfully. It is also used to add or remove other key cards, phone keys, or fob keys though the key card does not support automatic locking and unlocking.
To start Tesla model 3 with a key card, power up model 3 by pressing the brake pedal while inside the vehicle. And within two minutes of scanning the key card, you can go on with the next step.
But if you wait more than two minutes, you will need to re-authenticate in order for the card key to be detected. Once the card key is detected, you can now start your Tesla model 3 successfully.
Watch Video Guide
On The Blog
How to Remove Charger from Tesla Model Y
How to Become a Certified Tesla Solar Roof Installer
How to Put Tesla in Neutral for Car Wash
How to Spray Water on Windshield Tesla
How to Turn off Tesla Model 3 While Inside
How to Start Tesla Without Key Card
To start Tesla without a key card, press the phone key button in the Tesla app and press start to begin searching for connectivity. Once your phone and car are connected, you can now confirm the pairing by pressing starting the Tesla vehicle successfully.
However, there are a few different ways you can start a Tesla vehicle without using the key card:
-
Use the Tesla mobile app: If you have the Tesla mobile app installed on your smartphone, you can use it to remotely unlock and start your Tesla vehicle.
-
Use a Tesla key fob: If you have a Tesla key fob, you can use it to unlock and start your Tesla vehicle.
-
Use a Bluetooth-enabled device: If you have a Bluetooth-enabled device (such as a smartphone or smartwatch) that is paired with your Tesla vehicle, you may be able to use it to unlock and start the vehicle.
-
Use the keypad on the door handle: If your Tesla vehicle is equipped with a keypad on the door handle, you can enter the correct code to unlock and start the vehicle.
It’s important to note that you will need to have access to your Tesla account and have the necessary permissions to use these methods to start the vehicle. If you don’t have any of these options available and you don’t have the key card, you may need to call Tesla’s roadside assistance or a locksmith to help you retrieve the key card or gain access to the vehicle.
Why is My Tesla Key Card Not Working
The reason why your Tesla key card is not working is probably that the key card is not recognized while inside a wallet. And it may be due to interference from other contactless cards.
To rectify such a problem, you need to place the card flat against the b-pillar between the front and rear doors. And just a few inches below the camera hidden behind the glass then your Tesla key card will now be working.
Tesla Replacement Key Card Cost
You can actually get your key card replaced but unfortunately, getting your lost car key can cost you about 25 dollars to 400 dollars depending on the model. This is because of the different models with different costs for the key cards.
Note that the key card replacement cost for model 3 is about 25 dollars while model y key card costs 175 dollars including 85 dollars additional programming fee. So you can go for your models now that you know the costs.
Also, the key card will work as a backup if you can’t open the vehicle with your phone successfully. But you can purchase a key fob for 175 dollars that pairs with your Tesla automatically and allows hands-free access.
Is Tesla Key Card Waterproof?
Yes, actually Tesla key card is waterproof as it is a passive radio frequency identification signals tag. It has no actual electronics without a reader or writer in close proximity.
But the model 3 key fob is actually water resistant and not waterproof so take note of that. Also, note that exposure to heavy rainfall or water submersion may surely damage the key fob.
How Do You Open a Door with a Key Card?
Note that the key card door lock is triggered once the magnetic strip on the door is read by the card. And also it can happen when the key card is been verified by the card reader of the door.
To open a door with a key card, you need to position the key card and click it against the card reader that is located below the autopilot camera. You will find the autopilot camera is located on the driver’s side door pillar.
So when the door of the vehicle detects the key card, the exterior lights will flash and the mirrors unfold or fold but fold mirrors means on. Now the horn sounds that’s is confirmation sound on and the doors unlock and open.
Conclusion
In conclusion, to use a key card to unlock or lock Tesla model 3, you need to position the card and click it against the card reader located below the autopilot camera. You will find the autopilot camera is located on the driver’s side door pillar.
So when model 3 detects the key card, the exterior lights will flash and the mirrors unfold or fold but fold mirrors means on. Now the horn sounds that’s is confirmation sound and the doors unlock or lock.
By now you have gotten a lot of information about how to use Tesla key card to lock and unlock your Tesla vehicle successfully. You can now go ahead and make use of the information in a practical way.
Leave a Reply
You must be logged in to post a comment.